Biogas Generator

Abstract

Biogas generator set can not only turn waste into treasure, but also save money in a sense. In addition, the biogas generator set is environmentally friendly and will not pollute the environment.Compared with traditional generators, biogas generators have better power generation performance and lower power generation noise.

TONTEK POWER biogas generator uses renewable energy biogas as the input fuel to generate clean energy: electricity and heat, and the comprehensive utilization  rate of energy. It involves a low investment cost and short recycling cycles. It guarantees the efficiency and independence of energy use. It is mainly used in  farms, food factories, industrial organic waste-water, agricultural straw, waste treatment plants and urban landfills.

Main Features

●High quality components are selected from the top international manufacturers, with high reliability and perfect performance.

●The comprehensive utilization of biogas will help in reducing the greenhouse effect and promoting a various cycle of ecology. .

●The advanced intelligent control system can simultaneously monitor other main and auxiliary equipment in the biogas project to make the operation to be more safe and reliable.

● The set is durable and easy for maintenance.

● The set has strong environmental adaptability.

● Strong start-up capability at low temperature, high start-up success rate.

●Regulate power output and control exhaust emissions by monitoring combustion chamber temperature and knock.

● Low thermal load on biogas generator engines

● International advanced imported ignition module components makes the ignition energy more powerful and the combustion more sufficient, reduces the exhaust emissions, truly achieves energy saving and emission reduction

●Intelligent parallel machine control system can realize parallel operation of multiple units to meet the power demand of large load.

●All components of the generator set are carefully designed to operate in perfect coordination with the system for optimal performance and maximum efficiency.

★Remarks:

• Model with “B” means for biogas; Model with “NB” means for both natural gas and biogas;

• Model with “•” means engine air intake is naturally aspirated (without turbocharger and intercooler), which is suitable for low quality methane gas.

• 50Hz & 60Hz are available, Various low Voltage and High Voltage of 3.3kV~13.8kV are available for options.

• Special requirements for Soundproof Canopy/Container, ATS, Synchronizing Parallel Control panels and CHP are available for options.

• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.

★Remarks:

• Low voltage of 380V/400V/415V/440V/480V/690V, High Voltage of 6.3KV/10.5KV and other special voltages are available.

• Special requirements for Soundproof Canopy/Container, ATS, Synchronizing Parallel panels and CHP are available for your options.

• Above power ratings are based on natural gas (PNG, LNG, CNG). For other gas types such as biogas, oilfield associated Gas and Coalmine Gas etc., the engine power rating will be adjusted according to the exact gas quality.

• The data herein can vary depending on individual production requirements or due to improved technology.

★Remarks:

• Above Gensets Models are based on AC Voltage of 400/230V and 480V/270V, Other special low Voltages.

• Above data is based on gas HV 20.4MJ/ Nm³; Power Factor Cosφ=1; Exhaust Temperature decreased to 120℃; Heat Value Tolerance 8%, Output Power Tolerance 5%.

• NOx Emissions Level <500mg/m3 . Special requirements for emissions data such as EPA Standard can be realized by adding SCR and CO Catalyst.

• Engine Overhaul Time is around 50000~60000 hours.

• Wrranty terms: 15 Months after delivery , 12 Months after Installment or 8000 hours accumulated running time, which is subject to the earlier one.

• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.

★Remarks:

• Above Gensets Models are based on AC Voltage of 400/230V and 480V/270V, Other special low Voltages.

• Above data is based on gas HV 20.4MJ/ Nm³; Power Factor Cosφ=1; Exhaust Temperature decreased to 120℃; Heat Value Tolerance 8%, Output Power Tolerance 5%.

• NOx Emissions Level <500mg/m3 . Special requirements for emissions data such as EPA Standard can be realized by adding SCR and CO Catalyst.

• Engine Overhaul Time is around 50000~60000 hours.

• Wrranty terms: 15 Months after delivery , 12 Months after Installment or 8000 hours accumulated running time, which is subject to the earlier one.

• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.

★Remarks:

• Above engine marked “•” version optimized for island operation and load compensation.

• Above engine marked “♦” means optimized efficiency version.

• Transport dimensions for gensets; components set up separately must be taken into consideration.

• According to ISO 3046/1 at U=0.4 kV,cos=1.0 for 50 Hz and methane number of MN-70 (MN-80 for some engine models) for natural gas.

• Exhaust gas cooled to 120°C for natural gas and 150°C (TCG2032 180°C) for biogas.

• NO ≤ 500 mg/Nm³; exhaust gas dry at 5 % O2.

• Data for special gas and dual gas operation on request.

★Remarks:

• Above engine marked “•” version optimized for island operation and load compensation.

• Above engine marked “♦” means optimized efficiency version.

• Transport dimensions for gensets; components set up separately must be taken into consideration.

• According to ISO 3046/1 at U=0.4 kV,cos=1.0 for 50 Hz and methane number of MN-70 (MN-80 for some engine models) for natural gas.

• Exhaust gas cooled to 120°C for natural gas and 150°C (TCG2032 180°C) for biogas.

• NO ≤ 500 mg/Nm³; exhaust gas dry at 5 % O2.

• Data for special gas and dual gas operation on request.